Control cabinet

Cable systems

Cable systems
Cable Systems
In its cable systems division we develop and produce customized products and optimized solutions for the widest range of applications
Our cable assembly provides high-quality standards for a reliable and safe electrical connections.


Condensation monitor
EE46 - Condensation monitor
EE46 condensation monitors are used to monitor the formation of condensation on chilled ceilings and to prevent condensation at critical spots of heating-, ventilation- and air conditioning systems. It is also used as a dewpoint monitor for systems operating near the dewpoint.
Because of the temperature coupling between the condensation monitor and the environment, the relative humidity is a measure for the dew-point. The condensation monitor measures the relative humidity near the dewpoint using its high-quality capacitive RH sensor. At reaching the switching point of 90% RH the output will provide an early warning signal for the initiation of control steps (increasing the initial water temperature, reducing the cooling capacity, switching on the heating, etc...).
For example is this a good way to protect power converter against dew.
Humidity sensors
EE160 - Humidity / temperature transmitter (inside)
The EE160 sensor is a costeffective, highly accurate and reliable solution for measuring relative air humidity and temperature in different sensitive applications such as electrical control cabinets or any other electrical device.

The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring flawless operation.
EE21 - Humidity / temperature transmitter (inside)
Transmitters of the EE21 series have been developed for high-precision measurement of relative humidity and temperature. EE21 transmitters are available for wall and duct mounting and the outputs can be selected between voltage and current.

Special protection coating for the sensing element permits the permanent use in very pollutedenvironments.
Interface connectors and cable for sensors
Different interface converter for RS-232 to RS-485, USB and other communication standards are available. Similarly interface cable (e.g. M12) are available in different lengths.


CRG OptoLink converter for encoder with fibre optic interface
The CRG (compact robut gateway) OptoLink converter is together with an encoder with fibre optic interface the right solution for environments with high electromagnetic disturbances, transmission of signals over long distances and where galvanic insulation is required.
Encoder switch and splitter for incremental encoder signals
The encoder switch is able to switch and splitter incremental encoder signals. Therefore 6 channals for input and output are available with HTL, TTL or RS-422 signal interface. Designed in a compact DIN housing it is designed for rail mounting and usable as level converter.
Fieldbus gateway for encoder with EnDat interface
The fieldbus gateway for encoder with EnDat interface provides the functionality according to the CANopen, DeviceNet or PROFIBUS DP protocol. This allows to be highly flexible in connecting robust encoder to fieldbuses.
Interface connectors and cable for encoders
A wide range of different connectors and cables for signal and data transmission is available.
Signal converter for frequency to analogue and serial output
The signal converter unit is able to convert frequncy to analogue or serial signals from incremental encoder with TTL, HTL or RS-422 interface. In a compact DIN housing the converter is prepared for rail mounting. Several output signal types like analogue (current, voltage) or serial (RS-232/RS-485) are available.
Speed monitor for speed control
The speed monitor is usable for control of overspeed, underspeed, standstill and direction of rotation of an encoder. Therefore three relays and an analogue output is available to react on selectable events. Designed in a compact housing for DIN rail mounting it is possible to read HTL, TTL or RS-422 signals of an encoder.